This is an old revision of the document!
The ssr.xml file defines the SSR code blocks to be used and the SSR Code allocation rules used for departing or transiting aircraft when a code allocation or change is necessary. The file is composed of two sections, the first one defining the code blocks that shall be used, the second one defining the allocation rules.
The ssr.xml
file is located in the fir/
directory
Root Element | ssr | ||
---|---|---|---|
Element | codeblocks | ||
Element | block | ||
Element | allocation | ||
Element | modesasp | ||
Element | ssr |
The structure of the elements are as follows:
Element | block | |
---|---|---|
Attribute | Format | Remarks |
id | string | Unique ID of this code block - must be unique for this FIR ! |
first | integer | First code available in this block |
last | integer | Last code available in this block |
prtm | integer | PRotection TiMe - time in minutes that a code is protected (not allocated) |
The <modesasp> elements shall only be used when mode A code 1000 can be assigned to specific city pairs. Note that only specific departure and destination airports and routes are eligible for a A1000 ssr code. The usage of A1000 requires complete mode S surveillance coverage from ground to air to ground at arrival (gate to gate Mode S coverage). This is also called Mode S declared airspace. Only major airports with the required surveillance equipment (multilateration, mode S radar coverage, etc..) use A1000. If not present,A1000 is not used. A1000 does not use a ssr code block.
Element | modesasp | |
---|---|---|
Attribute | Format | Remarks |
adep | string | departure airport icao code (starts with) |
ades | string | arrival airport icao code (starts with) |
Element | ssr | |
---|---|---|
Attribute | Format | Remarks |
block | string | ID of code block defined in <codeblocks>, a code block can be used in multiple allocation rules |
fr | V / I / IV | Flight Rules (I = IFR, V= VFR) |
adep | string | Departure aerodrome (1, 2, 3, 4 characters of ICAO code = EB or EBBR) |
ades | string | Arrival aerodrome (1, 2, 3, 4 characters of ICAO code = EB or EBBR) |
sid | string | Assigned departure route (starts with) |
minrfl | integer | Lowest requested flight level |
maxrfl | integer | Highest requested flight level |
tip: use the first part (point name) of the SID name to allocate to multiple SIDs which use the same point name.