This is an old revision of the document!

mapcolors.xml

The mapcolors.xml file is used define a RGB color for each of the color codes used in the maps using the color= attribute. The colors are defined per FIR definition and allow you to define a look and feel as close as possible to the local real life ATM system.

Attribute	Format	Remarks
Root Element	colors
Element	color
id	string	color name, used as color identification in the maps.
r	byte	RGB color code (0-255)
g	byte	RGB color code (0-255)
b	byte	RGB color code (0-255)
a	byte	RGB color code (0-255)
text	string	text to display for this color in the color editor
brt	string	Value of Brightness group

Note: If no Alpha value is specified, 255 (100% opacity) is used

Example

<colors>
    <color id="fir_bdry"     r="15" g="15"  b="15" a="120" text="FIR boundary" brt="airspace"/>
    <color id="airspace_low" r="50" g="50"  b="50" text="Airspace low" brt="airspace" />
    <color id="ebbr_ap_bdry" r="65" g="112" b="40" text="EBBR ground boundary" brt="airspace" />
</colors>

Back